The small steering part that keeps the Maxi Pro tracking straight
The B-Bend is a replacement part for the Maxi Pro scooter, listed under Micro Kickboard scooter parts and intended for use with Maxi Deluxe Pro models. It sits in the steering assembly, and when it wears or bends, the front end can start to feel vague or loose. Replacing it is a targeted fix rather than a whole-scooter overhaul.
This guide covers what the B-Bend does, how to recognize when it needs swapping, and how to confirm you are ordering the right part for your Maxi Pro.
How the B-Bend fits into the Maxi Pro steering
The B-Bend is one of several small components that connect the handlebar and steering column to the front wheel assembly. Its job is to transfer steering input smoothly while absorbing some of the flex that comes with daily riding. Over time, repeated stress can cause the bend to deform or the mounting points to loosen.
Because it is a dedicated Maxi Pro spare part, it is not a universal steering component. The catalog lists it as compatible with Maxi Deluxe Pro parts, so it is designed to fit that model's geometry rather than being adapted from another scooter.
The B-Bend at a glance
- Parts: B-Bend, Maxi Pro: Replacement B-Bend part for the Maxi Pro scooter, SKU Standard (code 4773). Confirms this is the correct spare for a Maxi Pro rather than a generic steering part.

Parts: B-Bend, Maxi Pro - Parts: B-Bend, Maxi Pro: Compatible with Maxi Deluxe Pro parts. Use this as a fit check before ordering: your scooter should be a Maxi Deluxe Pro model.
Signs your Maxi Pro B-Bend may need replacing
These are the common symptoms riders notice before they realize the B-Bend is the culprit. Check them in order, starting with the simplest.
- Steering feels loose or vague: If the front wheel does not respond crisply to handlebar input, a worn B-Bend can be one contributor. Rule out a loose handlebar clamp first.
- Visible bend or deformation: Inspect the B-Bend for any bend that deviates from its original shape. A deformed part will not transfer steering force evenly.
- Rattling or knocking over bumps: A loose or worn B-Bend can produce a knock that is felt through the handlebars, especially on uneven pavement.
- Uneven tire wear on the front wheel: If the front wheel is not tracking straight, the tire may wear unevenly. This can have several causes, but a bent B-Bend is worth checking.
When swapping the B-Bend makes sense — and when to check further
Replacing the B-Bend is a sensible move when you have confirmed visible deformation or when steering looseness persists after checking the handlebar clamp and other fasteners. Because it is an inexpensive part, it is often worth swapping before chasing a steering problem through more expensive components.
If the steering still feels wrong after a new B-Bend is fitted, the issue may lie elsewhere in the steering assembly. In that case, inspect the handlebar clamp, the steering column, and the front wheel axle before ordering more parts. The supplied product information does not include installation instructions or torque settings, so if you are unsure about the swap, have a qualified mechanic handle it.
Confirming fit before you order
The B-Bend is listed for Maxi Deluxe Pro models. Before ordering, check the model name on your scooter's deck or documentation. If you ride a different Maxi variant, this part may not be the correct fit, and the catalog does not confirm compatibility beyond Maxi Deluxe Pro.
The part is available in a single Standard variant, so there is no size or color decision to make. Order one B-Bend if you are replacing a single worn part; keep a spare only if you regularly ride hard or have had this part fail before.

