Quick answer
To install griptape on a suspension scooter, start by removing the old grip tape and cleaning the deck surface, then apply the new griptape evenly, pressing from the center outward to avoid bubbles.
Why suspension scooters need special attention
Suspension scooters have a slightly different deck shape and often include a flex plate or spring mechanism near the rear. This means the griptape must be trimmed carefully around these components to avoid interfering with movement. Always check that the griptape you choose is designed for suspension models, like the Micro Kickboard Griptape for Suspension, which fits the deck contours precisely.
Step-by-step installation guide
- Remove old griptape: Use a heat gun or hair dryer to warm the old griptape, then peel it off slowly. If residue remains, clean the deck with isopropyl alcohol and a cloth. Check that the deck is completely dry and free of adhesive before applying new tape.
- Cut the new griptape to size: Place the new griptape on the deck and mark where it overlaps the edges. Use sharp scissors or a utility knife to trim it, leaving about 1/8 inch overhang on each side for a snug fit. Trim in a well-lit area to avoid cutting too much off.
- Peel and position the griptape: Peel the backing paper from the griptape. Align it carefully with the front of the deck, then lower it slowly onto the surface. Avoid touching the adhesive to the deck until you are sure of the alignment. If the tape touches the deck in the wrong spot, lift it gently and reposition immediately.
- Press and smooth the griptape: Starting from the center, press the griptape firmly onto the deck using a rubber roller or a clean cloth. Work outward to push air bubbles to the edges. A credit card wrapped in a soft cloth works as a DIY roller if you don't have one.
- Trim the edges and finish: Use a utility knife to carefully trim the overhanging griptape along the deck edge. Press the edge down with your fingers or a roller to ensure it adheres securely. Run your fingers along the edge once more after trimming to prevent peeling.
Product facts
- Parts: Griptape for Suspension: Griptape for Suspension is a Micro Kickboard scooter part offered in Black, listed under Suspension Parts, intended for use with suspension-style scooters. Using a griptape designed specifically for suspension scooters ensures proper fit around the suspension components, reducing the risk of peeling or misalignment.

Parts: Griptape for Suspension

