Back to Blog
How-to Guides 2026-10-31 Micro Kickboard 12 views

How to Replace a Cruiser Handlebar Top Holder

How to Replace a Cruiser Handlebar Top Holder

Learn how to replace the top holder on a Micro Cruiser scooter handlebar. This guide covers the tools needed, step-by-step instructions, and common mistakes to avoid.

Quick answer

To replace a Micro Cruiser handlebar top holder, remove the old holder, insert the new one (SKU 6022), and secure it with the included screw. This restores handlebar stability and prevents wobble.

Why replace the top holder?

The top holder on a Micro Cruiser handlebar secures the stem and prevents excessive play. Over time, the plastic can crack or the screw can strip, leading to a loose, unsafe ride. Replacing it restores the original fit and extends the life of the scooter.

Tools you'll need

You only need a Phillips-head screwdriver and the replacement top holder (Micro Kickboard part SKU 6022). No special tools are required, but having a small flashlight helps to see into the handlebar opening.

Replacement steps

  1. 1. Remove the old top holder: Use a Phillips-head screwdriver to unscrew the single screw holding the top holder in place. Pull the old holder out of the handlebar opening. Common mistake: Forgetting which way the screw turns. It loosens counterclockwise.
  2. 2. Insert the new top holder: Align the new top holder (SKU 6022) with the handlebar opening. Push it in until it sits flush with the top of the stem. The holder's tab should face the scooter's rear. Checkpoint: The holder must be fully seated. If it sticks out, the screw won't thread properly.
  3. 3. Secure with the screw: Insert the screw through the holder's center hole and into the stem. Tighten it clockwise until snug. Do not overtighten—this can strip the plastic or the threads. Checkpoint: The holder should feel firm but not crushed. A slight wiggle is normal; excessive play means the holder is loose.
  4. 4. Test the handlebar: Hold the handlebar and try to twist it. If it moves independently of the front wheel, the top holder is not secure. Recheck the screw tightness. Common mistake: Skipping this test. A loose handlebar can cause loss of control while riding.

Product facts

  • Parts: Top Holder for Cruiser Handlebar: The Top Holder for Cruiser Handlebar is a replacement part for Micro Cruiser scooters, identified by SKU 6022. This part is designed specifically for the Micro Cruiser handlebar, so it will fit without modification. Using a non-OEM part may not align properly.
    Parts: Top Holder for Cruiser Handlebar
    Parts: Top Holder for Cruiser Handlebar

Related Articles

Customer Service
Home
Products
Cart
Profile