How to Replace a Kickboard Deck on the Reloaded Scooter
By Micro Kickboard | Published: 2026-10-13
Category: How-to Guides
A step-by-step guide to removing and installing a new deck on your Micro Kickboard Reloaded, including the tools you need and the mistakes to avoid.
Quick answer
To replace the deck on your Micro Kickboard Reloaded, you'll need a Phillips-head screwdriver, a 4mm hex key, and a soft mallet. Remove the old deck by unscrewing the mounting bolts, then align and secure the new deck. The official replacement deck is available in White and Olive Green. Set aside 20–30 minutes and work on a clean, flat surface.
Tools and prep before you start
Gather a Phillips-head screwdriver, a 4mm hex key, and a soft mallet. A small container for screws prevents loss. Work on a clean, flat surface with good lighting. If your scooter is dirty, wipe down the deck area first so grit doesn't fall into the folding mechanism.
Removing the old deck
Flip the scooter upside down. Locate the four bolts securing the deck to the frame. Loosen them in a diagonal pattern to avoid bending the deck. If a bolt is stuck, apply a small amount of penetrating oil and wait a few minutes. Once all bolts are removed, gently lift the old deck away. If it's stuck, tap the underside with a soft mallet—never pry with a metal tool, which can scratch the frame.
Installing the new deck
Align the new deck with the mounting holes. Insert the bolts by hand first, then tighten them in a diagonal pattern until snug. Do not overtighten—you can strip the threads or crack the deck. Once all bolts are tight, test the folding mechanism to ensure it operates smoothly. If you're also replacing the top holder for the handlebar, now is a good time to do it while the deck is off.
Step-by-step deck replacement
- Prep your workspace: Clear a flat, well-lit area. Gather a Phillips-head screwdriver, 4mm hex key, soft mallet, and a container for screws. Missing tools mid-job risks lost screws or scratched parts.
- Remove the old deck: Flip the scooter, loosen the four deck bolts in a diagonal pattern, and lift the deck away. If stuck, tap gently with a mallet. Never pry with metal tools—you can bend the frame.
- Install the new deck: Align the new deck, hand-thread the bolts, then tighten diagonally until snug. Test the fold mechanism. Overtightening can strip threads or crack the deck.
- Final check: Ensure all bolts are tight and the deck sits flush. Ride slowly at first to confirm stability. If you notice wobbling, recheck bolt tightness.
Parts that fit the Reloaded
- Parts: Deck for Kickboard Reloaded: Replacement deck for the Kickboard Reloaded, available in White and Olive Green. Choose the color that matches your scooter or give it a fresh look.
- Parts: Top Holder for Handlebar for Speed/Sprite Deluxe, Classic Neochrome, Maxi Pro, & Kickboard Reloaded: Top Holder for Handlebar compatible with Speed/Sprite Deluxe, Classic Neochrome, Maxi Pro, and Kickboard Reloaded; available in Black or Silver. If your handlebar feels loose, replacing this small part during a deck swap saves time later.
- Parts: Black Push Button for Folding Block: Black Push Button for Folding Block compatible with Sprite, Bullet, Micro White/Black, Flex Blue, Flex, and Speed+. Check compatibility before ordering—this button does not fit the Reloaded.
