Kickboard Original Steering Head: Replacement FAQ
By Micro Kickboard | Published: 2026-11-03
Category: Avis produits
Answers to common questions about replacing the complete steering head on a Kickboard Original, from wobble symptoms to part number 1099 and installation checks.
Quick answer
If your Kickboard Original has developed play, clunking, or vague steering that adjustment cannot fix, replace the whole steering head with the complete assembly rather than chasing individual internal parts. The Micro Kickboard Steering Head (Complete) for Kickboard Original, part number 1099, is the direct-fit replacement.
When a complete steering head makes more sense than a partial fix
A steering head is a system of mating surfaces, not a single wear item. Once one internal interface is worn, the others have usually taken the same load. Replacing only the visibly damaged piece often leaves you with a assembly that still has play or binds. The complete unit removes that guesswork and restores the original geometry in one go.
The trade-off is cost and disposal: you pay for the whole assembly and discard serviceable-looking parts. For a board that is otherwise sound and used regularly, that is usually the more reliable path. For a board with frame damage or multiple unrelated faults, a complete head may not be the right first spend.
Why steering wobble is not always a steering head problem
Wobble can come from a loose or worn head, but it can also come from a wheel bearing, a cracked deck, or a loose axle. Before ordering a steering head, check that the play is actually at the head: hold the board still and try to rock the handlebar assembly independently of the deck. If movement is confined to the head, replacement is justified. If the whole front end shifts, inspect the surrounding hardware first.
This matters because a complete steering head will not cure wobble caused elsewhere, and fitting one can mask a second fault until it gets worse.
Kickboard Original steering head FAQ
- What does the complete steering head include?
- The listing describes it as a complete steering head replacement for the Kickboard Original. It is supplied as an assembly rather than as loose internal components, so you replace the unit as a whole.
- Will this fit my Kickboard Original?
- It is listed specifically for the Kickboard Original. Micro Kickboard makes other scooters and kickboards, so check your model name before ordering rather than assuming a visual match. If you are unsure of your model, measure or photograph the existing head before purchase.
- How do I confirm the steering head is the cause of the wobble?
- With the board on the ground, grip the handlebar assembly and try to rock it front to back while watching the junction with the deck. Movement at that junction points to the head. Movement at the wheels or deck points elsewhere.
- Can I replace just the worn internal parts instead?
- The catalog offers the complete assembly, not individual internal components. If you want to reuse existing parts, you would need to source them separately, which the listing does not support.
- What should I check after fitting a new steering head?
- Recheck for play at the head junction, confirm the handlebar turns freely without binding, and test at low speed before normal use. If play remains, the issue is likely in the surrounding mounting points rather than the head itself. Keep the old assembly until the new one has passed a low-speed test.
Product facts
- Parts: Steering Head (Complete) for Kickboard Original: Replacement part number 1099, listed for the Kickboard Original. Matching the part number to your model avoids ordering a head that looks similar but does not fit.
Parts: Steering Head (Complete) for Kickboard Original
