How to Replace Cork Handlebar Grips on a Sprite Eco Scooter

Quick answer

Replace worn cork handlebar grips on your Sprite Eco scooter by gently prying off the old grips and pressing the new Micro Kickboard cork grips into place. This simple maintenance task restores comfort and control.

Step-by-step replacement guide

1. Remove the old cork grips: Slide a thin flathead screwdriver or a plastic pry tool under the edge of the old grip. Work it around gently to loosen the grip from the handlebar. Pull the grip off once it's free. If it's stuck, apply a little isopropyl alcohol under the edge to soften the adhesive. Avoid cutting the handlebar or scratching the metal tube. Cork is brittle; take your time to avoid crumbling.
2. Clean the handlebar surface: Wipe the bare handlebar with a clean cloth and rubbing alcohol to remove dirt, oil, and old adhesive residue. Let it dry completely. A clean surface ensures the new grip won't slip or rotate during use.
3. Install the new cork grips: Align the grip with the handlebar end and push it on firmly. Use a twisting motion while pushing to help it slide into place. Make sure the grip is fully seated against the handlebar end cap or the grip ring. Do not use lubricant on cork grips—they rely on friction. If the grip is too tight, warm it slightly with a hair dryer to soften the cork.
4. Check alignment and test: Spin the grip to ensure it's straight and not twisted. Squeeze it to confirm it's snug. Take the scooter for a short test ride to verify the grip doesn't shift under your hands. If the grip moves, remove it, add a thin layer of grip glue or double-sided tape, and reinstall.

Product fact

• Parts: Cork handlebar grips for Sprite Eco: These cork handlebar grips are replacement parts for the Micro Kickboard Sprite Eco scooter, listed under Scooter Parts. They are made to fit the Sprite Eco handlebar exactly, so you avoid the guesswork of universal grips that may slip or require trimming.