How to Replace a Cruiser 200mm LED Wheel
By Micro Kickboard | Published: 2026-10-26
Category: How-to Guides
Learn how to swap a worn or damaged Cruiser 200mm LED wheel on your Micro Cruiser scooter, with step-by-step instructions and common mistakes to avoid.
Quick Answer
To replace the Cruiser 200mm LED wheel, you'll need a few basic tools and about 15 minutes. The process involves removing the wheel axle, swapping the wheel, and reassembling—no special skills required.
Why Replace the LED Wheel?
The LED wheel on your Micro Cruiser not only adds visibility but also a fun glow. Over time, the wheel can wear down or the LED mechanism can fail. Replacing it restores both performance and the light-up effect.
Using the correct replacement part, such as the Cruiser 200mm LED Wheel (SKU 6051B), ensures compatibility with your scooter's fork and axle. Avoid generic wheels that may not fit properly.
Tools You'll Need
Gather a 5mm Allen wrench (or the size that fits your axle bolts), a flat-head screwdriver for prying off any hubcaps, and a clean cloth. Check your scooter's manual for the exact bolt size if unsure.
Step-by-Step Replacement Process
- Secure the scooter: Turn the scooter upside down or place it on a stable work surface. Use a cloth to protect the deck and handlebars from scratches. Make sure the scooter is stable before you start to prevent it from slipping.
- Remove the axle bolts: Using the appropriate Allen wrench, loosen and remove the bolts on both sides of the wheel axle. Keep them in a safe place. Common mistake: losing the small bolts. Place them in a container or magnetic tray.
- Take off the old wheel: Slide the wheel off the axle. If it's stuck, gently tap it with a rubber mallet or use a flat-head screwdriver to pry it free, being careful not to damage the fork. Don't force it—check for any retaining clips or washers that might still be attached.
- Install the new LED wheel: Slide the new Cruiser 200mm LED wheel onto the axle, ensuring it sits evenly between the fork arms. Align any spacers or washers as they were on the old wheel. Check that the wheel spins freely before tightening the bolts fully.
- Reattach and tighten the axle bolts: Replace the bolts and tighten them snugly. Avoid over-tightening, which can damage the bearings. Spin the wheel to confirm smooth rotation. After a short ride, re-check the bolts to ensure they haven't loosened.
Product Spotlight
- Parts: Cruiser 200mm LED Wheel: The Cruiser 200mm LED Wheel is a replacement part for Micro Cruiser scooters, identified by SKU 6051B. This ensures a perfect fit and maintains the original LED functionality, so you don't have to worry about compatibility issues.
Parts: Cruiser 200mm LED Wheel
