Install Attachment Bolt and Screw on Mini 3in1 Deluxe Plus

Quick answer

Replacing the attachment bolt and screw on a Mini 3in1 Deluxe Plus is a straightforward fix that restores the scooter's folding mechanism. Use the correct Micro Kickboard replacement pair and follow the steps below to avoid stripping the threads.

Step-by-step installation

1. Remove the old bolt and screw: Use a Phillips-head screwdriver to unscrew the old bolt and screw from the folding joint. Keep the parts aside for reference. Check that the old hardware is fully removed and no broken pieces remain inside the joint.
2. Align the new bolt and screw: Insert the new bolt through the folding joint, then thread the screw into the bolt from the opposite side. Hand-tighten until snug. Do not cross-thread; if resistance increases suddenly, back out and realign.
3. Tighten securely: Use the screwdriver to tighten the screw until the joint is firm. Do not overtighten, as this can strip the plastic threads. Test the fold: the joint should hold firmly without wobble, but still allow smooth folding.

Product facts

• Parts: Attachment Bolt & Screw (Pair) for Mini 3in1 Deluxe Plus: This is a replacement Attachment Bolt & Screw pair for the Micro Kickboard Mini 3in1 Deluxe Plus, sold as a pair. Using the correct OEM pair ensures a precise fit and reduces the risk of stripping the threads during installation.