Right Side Washer on a Micro Scooter: What It Does
By Micro Kickboard | Published: 2026-11-04
Category: How-to Guides
The right side washer sits between the wheel and the scooter deck, reducing friction and keeping pressure even. Here is what it does and how to replace it.
Quick answer
The right side washer on a Micro scooter reduces friction and spreads pressure evenly between the wheel and the scooter body. Replace it when it is missing, bent, or worn so the wheel spins smoothly and the axle stays protected.
Why the right side washer matters more than its size suggests
A washer is a small part with a simple job: it keeps metal surfaces from grinding against each other and helps the wheel sit squarely. Without it, the wheel can bind, wear unevenly, or loosen over time. The right side washer is specific to that side of the wheel assembly, so using the correct part matters. If you are unsure which side is which, check the exploded diagram for your model or note the order of parts as you remove the wheel.
When to replace rather than reuse
Inspect the washer whenever you remove a wheel. A washer that is flattened, cracked, or noticeably thinner than a new one has lost its ability to keep pressure even. Reusing a worn washer can lead to a wobbly wheel or a loosening axle. Because washers are inexpensive, keeping a spare on hand avoids reassembling with a compromised part.
Right side washer questions answered
- What does the right side washer actually do?
- It sits between the wheel and the scooter bottom to reduce friction and distribute pressure evenly. That keeps the wheel spinning freely and prevents the axle from digging into the scooter body.
- How do I install a new right side washer?
- First, remove the old wheel. Using two Allen keys, insert one into the square side of the bolt and hold it steady. Insert the second Allen key into the round side of the bolt and rotate counterclockwise to loosen. Remove the wheel. Remove the screw holding the shank to the scooter. Remove the washer between the shank and the wheel, then fit the new washer in the same position and reassemble in reverse order. Keep the old washer until you confirm the new one seats correctly.
- Can I ride without the right side washer?
- No. Riding without it allows metal-on-metal contact, which can accelerate wear and make the wheel feel loose or noisy. Replace a missing washer before riding.
- How often should I check the washer?
- Check it every time you remove a wheel for cleaning or tire replacement, and anytime you notice a rattle or uneven wheel spin. A quick visual check takes seconds and prevents bigger problems.
- Is the right side washer the same as the left?
- They are separate parts designed for their respective sides. Use the correct side washer for each position; substituting one for the other may not seat properly.
Product facts
- Parts: Right Side Washer: Reduces friction and ensures even pressure between the wheel and the scooter bottom. This is the core function: a fresh washer helps the wheel run smoothly and protects the scooter body from uneven wear.
Parts: Right Side Washer
